Category: Trans Instruments

#TransInstruments
#pH_Meter #TDS_Meter #Conductivity_Meter #Redox_Tester #Dissolved_Oxygen_Meter
For more information pls contact our support teem….
Cell: +880 1811155717; 01612526665 | E-mail: meterbd@gmail.com

Available Branded Laboratory Product in Bangladesh

We make import Available Quality Branded Product in Bangladesh. Such as…

  • Setra – USA.
  • Fawag – Poland.
  • AND – Korea.
  • DIGiScale – Germany.
  • TScale – Taiwan.
  • Fluke – USA.      
  • Hioki – Japan.   
  • Kyoritsu – Japan.             
  • Sanwa – Japan.                
  • Uni-T – China     Nicety – China.                
  • Smart Sensor – China.
  • Lutron – Taiwan.
  • Hanna – Romania.
  • Gondo Ezodo – Taiwan.
  • Clean Instruments – USA
  • Trans Instruments – Singapure.
  • Labcom – Germany.
  • Draminski – Poland.
  • MN – Germany
  • Schot Duran – Germany.
  • Pyrex – USA
  • Borosil – India
  • Glassco – USA
  • Merck – Germany
  • Mark – India
  • Loba – India
  • SDC – England
  • AATCC – UK
  • James. H. Heal – UK
  • Verivide – England
  • Aqua Boy – Germany
  • Shorder – Germany
  • Marto – Germany

Senz mSiemen (0~19.9mS)

The Senz mSiemen tester is designed to measure high water concentration.  It is widely used in industrial boilers, cooling towers and chemical mixing where water concentration is monitored.  The Senz mSiemen is rugged and accurate with a display resolution on 0.1mS and can measure up to 19.9mS.  With automatic temperature compensation, all readings are displayed at 25ºC for the ease of data comparison. It is also important for accuracy as temperature significantly affects liquid at high concentrations.

Precision
Precise display of 0.1 mS (mili-Siemen) over the scale of 0 to 19.9 mS.

One-Touch Calibration
On activation, the tester calibrates the end-point automatically at prescribed standard solution.

Auto-End Point
The tester automatically senses a stable end-point reading and freezes it for recording.

Hold Function
Able to freeze display for ease of reading and recording.

Beep Function
The tester beeps at every press of the button and beeps on every completed function and end-point reading.

Specifications:

Model:Senz mSiemen
Range:0.1 to 19.9 mS
Resolution:0.1 mS
Accuracy:± 2% full scale
Calibration Points:One touch button
Battery Type:4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:Approx. 100 hours
Automatic Shut-off:Approx. 15 minutes
Automatic Temperature Compensation:0 to 50°C or 32 to 122°F
Operating Temperature:0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):185mm x 65mm x 25mm
Packaging Weight:Approx. 135gm
Product Dimension Size (LxWxH):170mm x 32mm x 15mm
Product Weight:Approx. 70gm
Click to download Instructions Manual

Senz µSiemen (0~1,999µS)

The Senz µSiemen tester is a conductivity tester used to measure water concentrations.  It is used in water treatment, chemical dilution, testing of industrial waste or drinking water where water quality control is required.  The Senz µSiemen tester has a display resolution of 1µS.  It is both rugged and accurate. It is the best tool for the technician on the go!


Precision
Precise display of 1 µS (Micro-Siemen)

One-Touch Calibration
On activation, the tester calibrates the end-point automatically at the prescribed standard solution.

Auto-End Point
The tester automatically senses a stable end-point reading and freezes it for recording.

Hold Function
Able to freeze display for ease of reading and recording.

Beep Function
The tester beeps at every press of the button and beeps on every completed function and end-point reading.

Specifications

Model:Senz µSiemen
Range:1 to 1990 µS
Resolution:1 µS
Accuracy:± 2% full scale
Calibration Points:One touch button
Battery Type:4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:Approx. 100 hours
Automatic Shut-off:Approx. 15 minutes
Automatic Temperature Compensation:0 to 50°C or 32 to 122°F
Operating Temperature:0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):185mm x 65mm x 25mm
Packaging Weight:Approx. 135gm
Product Dimension Size (LxWxH):170mm x 32mm x 15mm
Product Weight:Approx. 70gm
Click to download Instructions Manual

Senz TDS 2 (100-10000 ppm)

The Senz TDS 2 is designed for liquid testing where high concentrations of below 10,000 ppm is measured. The Senz TDS 2 is both rugged and accurate.  TDS readings are converted from conductivity with the factor of 2 which is an industrial standard for water testing.  All readings are temperature compensated to 25ºC, a must for concentrated liquids.  The Senz TDS 2 is used to measure condensate, boiler water, swimming pool water and industrial waste control etc.

Precision
Precise display of 10 ppm over the scale of 0 to 10,000 ppm.

One-Touch Calibration
On activation, the tester calibrates the end-point automatically at prescribed standard solution.

Auto-End Point
The tester automatically senses a stable end-point reading and freezes it for recording.

Hold Function
Able to freeze display for ease of reading and recording.

Beep Function
The tester beeps at every press of the button and beeps on every completed function and end-point reading.

Specifications:

Model:Senz TDS 2
Range:100 to 10,000 ppm
Resolution:100ppm
Accuracy:± 2% full scale
Calibration Points:Single point at 6440ppm
Battery Type:4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:Approx. 100 hours
Automatic Shut-off:Approx. 15 minutes
Automatic Temperature Compensation:0 to 50°C or 32 to 122°F
Operating Temperature:0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):185mm x 65mm x 25mm
Packaging Weight:Approx. 135gm
Product Dimension Size (LxWxH):170mm x 32mm x 15mm
Product Weight:Approx. 70gm
Click to download Instructions Manual

Senz TDS (0~1999ppm)

The Senz TDS tester is designed for ruggedness and accuracy.  TDS is measured in water processing and industrial water treatment and control.  The conversion factor from conductivity is to the factor of 2 which is an industrial standard.  It is the best gauge to perform QC and on-site checks in boilers, cooling towers and chemical dilution for waste disposal.

High Precision
Precise display of 1 ppm over the scale of 0 to 1990 ppm.

One-Touch Calibration
On activation, the tester calibrates the end-point automatically at prescribed standard solutions.

Auto-End Point
The tester automatically senses a stable end-point reading and freezes it for recording.

Beep Function
Beeps at every press of the button and long beep on every completed function or end-point reading.

Specifications:

Model:Senz TDS
Range:1 to 1,990 ppm
Resolution:1 ppm
Accuracy:± 2% full scale
Calibration Points:Single
Battery Type:4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:Approx. 100 hours
Automatic Shut-off:Approx. 15 minutes
Automatic Temperature Compensation:0 to 50°C or 32 to 122°F
Operating Temperature:0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):185mm x 65mm x 25mm
Packaging Weight:Approx. 135gm
Product Dimension Size (LxWxH):170mm x 32mm x 15mm
Product Weight:Approx. 70gm
Click to download Instructions Manual

Senz pH Pro (0~14.00pH, ATC)

The Senz pH Pro is specially designed for high accuracy and ruggedness.  It’s excellent features are best suited for industries, laboratories and clinics, where accuracy is of utmost importance.  The tester is equipped with Automatic Temperature Compensation (ATC) to make accurate calibrations, which enhances accuracy in subsequent tests.

Ruggedness

Its ruggedness is unmatched by any similar pocket size tester. The uniquely re-enforced glass sensor can withstand accidental drops and shocks.One-Touch 2 Point CalibrationOn activation, the tester recognizes pH buffers at 7, 4, 10 and it performs 2 point calibrations and complete the end-point reading automatically.Auto-End PointEliminates guesswork!  The tester automatically senses a stable end-point reading and freezes it for recording.

Beep FunctionThe tester beeps at every press of a button and beeps on every completed function and end-point reading.

Specifications

Model:Senz pH Pro
Range:0.00 to 14.00 pH
Resolution:0.01 pH 
Accuracy:± 0.05 pH
Calibration:One-touch for 2 point calibration
Battery Type:4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:Approx. 150 hours
Automatic Shut-off:Approx. 15 minutes
Automatic Temperature Compensation:0 to 70°C
Operating Temperature:0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):185mm x 65mm x 25mm
Packaging Weight:Approx. 135gm
Product Dimension Size (LxWxH):170mm x 32mm x 15mm
Product Weight:Approx. 70gm
Click to download Instructions Manual

Senz pH Duo (0~14.0pH, 0~50ºC)

The Senz pH Duo is a 2 in 1 tester that measures pH as well as temperature in water.  This is especially convenient when both pH and temperature readings are needed.  Now you do not need to buy another thermometer and you also save time between tests.  The Senz pH Duo is rugged, splash proof and drop shock resistant.  The automatic endpoint reading means that a technician will not need to guess the endpoint of a pH reading, thus ensuring accurate records of data all the time.

Advanced features:

One-Touch Calibration
Effortless calibration with a single press of the button.  Always calibrate accurately!

Automatic Endpoint Reading & Calibration
Eliminates guesswork!  The unit automatically locks to an endpoint reading during each test and calibration.

Beep Function
Audible beep on every press of a button and a long beep on every completed function and end-point reading.

Specifications

Model:Senz pH Duo
Range:0 to 14 pH               0 to 50 °C
Resolution:0.1 pH                    0.1 °C
Accuracy:± 0.2 pH                 ± 0.5 °C
Calibration Points:Single point at pH7
Battery Type:4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:Approx. 150 hours
Automatic Shut-off:Approx. 15 minutes
Operating Temperature:0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):185mm x 65mm x 25mm
Packaging Weight:Approx. 135gm
Product Dimension Size (LxWxH):170mm x 32mm x 15mm
Product Weight:Approx. 70gm
Click to download Instructions Manual

Senz pH (0~14.0pH)

The Senz pH tester is specially designed for industrial applications. Its ruggedness surpasses other cheap pH meters. It is splash proof and floats on water. It’s portability makes it the most convenient and reliable tester for technicians to perform onsite water checking and testing. Ruggedness Its ruggedness is unmatched by any similar pocket size tester. The uniquely reinforced glass sensor can withstand accidental drops and shocks. One-Touch Calibration On activation, the tester performs a single point calibration at pH buffers 7, 4 or 10. Never missed a calibration point with the endpoint sensing feature. Auto-End Point Eliminates guesswork! The tester automatically senses a stable end-point reading and freezes it for recording. Beep Function The tester beeps at every press of a button and beeps on every completed function and end-point reading.

Specifications

Model:Senz pH
Range:0 to 14 pH
Resolution:0.1 pH 
Accuracy:± 0.2 pH
Calibration :One touch button
Battery Type:4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:Approx. 150 hours
Automatic Shut-off:Approx. 15 minutes
Operating Temperature:0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):185mm x 65mm x 25mm
Packaging Weight:Approx. 135gm
Product Dimension Size (LxWxH):170mm x 32mm x 15mm
Product Weight:Approx. 70gm
Applications:Water processing/ Purifying 
Pools & Spa
Industries :School/Education Institutes
Click to download Instructions Manual