Tag: TDS meter

7200 Ezodo Waterproof Multi-Function Meter Pen Type in Bangladesh

7200 Ezodo Waterproof Multi-Function Meter Pen Type

৳16,500.00

Model: 7200
Brand: Ezodo
Origin: Taiwan
Warranty: No
Stock: Available
Discount: No
Accessories: Available
Delivery Charge: BDT 200/-

  • 7200 Ezodo Waterproof Multi-Function Meter Pen Type in Bangladesh
  • 7200 Ezodo Waterproof Multi-Function Meter Pen Type in Bangladesh
  • 7200 Ezodo Waterproof Multi-Function Meter Pen Type in Bangladesh
7200 Ezodo Waterproof Multi-Function Meter Pen Type in Bangladesh

Waterproof pH/mV/Temperature Meter

Feature

Microprocessor based for fast and accurate measurements.
Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
Large LCD display pH or ORP or Conductivity or TDS or Salinity or DO and Temperature Simultaneously.
Simple to calibrate by one keyboard and automatic temperature compensation(ATC), Manual Salinity(MSC) and Altitude(MAC) Compensation.
Multi-functions with Data-hold, Max/Min and shows PTS after calibration. Degree ℃/℉ are switchable.
Low battery and consumption indicator. Auto power shut off after 10 minutes of non use.
Easy to replace electrode module, and the type of electrode would be recognized automatically and shown in display during insertion.

7200 Ezodo Waterproof Multi-Function Meter Pen Type in Bangladesh

PCT-407 Portable pH Conductivity TDS Meter in Bangladesh

PCT-407 Portable pH Conductivity TDS Meter

৳25,500.00

Model: PCT-407
Brand: Ezodo
Origin: Taiwan
Warranty: No
Stock: Available
Discount: No
Accessories: Available
Delivery Charge: BDT 200/-

Features:

Microprocessor based designed.
Large LCD built into adjustable “flip-up” cover, which can display pH or ORP or Conductivity and Temperature simultaneously.
Rugged design for handheld or bench top use, neck-strap for “hands-free” operation.
Automatic Temperature Compensation(ATC)
Memory function stores and recalls up to 150 points. MAX/MIN and data Lock. °C or °F are available.
Simple to calibrate by one keyboard for 5 points buffer, calibration value can be adjusted as needed.
Indicate percentage of slope (PTS) after calibration
Auto shut off after 10 minutes of non use.

PCT-407 Portable pH Conductivity TDS Meter in Bangladesh
PCT-407 Portable pH Conductivity TDS Meter in Bangladesh
PCT-407 Portable pH Conductivity TDS Meter in Bangladesh

Lutron BCT-4308 Bench type Conductivity/TDS Meter

Product Review

  • Conductivity : 200 uS/2 mS/20 mS/200 mS
  • It can select Temp. Coefficient of measurement solution
  • ATC for the conductivity/TDS measurement
  • Real time data logger (record year, month, date, hour, minute, second), 16,000 data logger
  • Wide sampling time adjustment
  • RS232/USB computer interface
  • Data hold, Record (Max., Min.)

৳ 42,500.00

Lutron BCT-4308 Bench Type Conductivity/TDS Meter Details

  • Professional bench type meter with large size LCD display with green color backlight, easy reading.
  • One meter for two purpose operation : Conductivity and TDS ( Total dissolved solids ), measurement.
  • Conductivity: 200 uS/2 mS/20 mS/200 mS.
  • Measurement unit can select uS/mS ( conductivity ) or ppm ( TDS )
  • Conductivity measurement can select Temp. Coefficient of measurement solution.
  • ATC for the conductivity/TDS measurement.
  • Real time data logger ( record year, month, date, hour, minute, second ), 16,000 data logger.
  • Auto data record, 16,000 Data logger no.
  • Wide sampling time adjustment range from one second to 8 hours 59 minutes 59 seconds.
  • Auto data logger, manual data logger.
  • RS232 computer interface.
  • , Min., Data hold.
  • Can default auto power off or manual power off.
  • 5V(UM-3,AA)x8PCsorDC9Vadapterin.
  • Separate probe, easy for operation of different measurement environment.
  • Wide applications: water conditioning, aquariums, beverage, fish hatcheries, food processing, photography, laboratory, paper industry, plating industry, quality control, school & college, water conditioning.

Lutron CD-4301 Four-Range Conductivity Meter

Product Review

  • Model : CD-4301
  • 4 ranges: 200 uS, 2mS, 20mS, 200mS
  • Automatic temperature compensation

৳ 17,500.00

Features

  • The portable conductivity meter provides fast, accurate readings, with digital readability and the convenience of a remote probe separately.
  • 4 ranges: 200 uS, 2mS, 20mS, 200mS.
  • Automatic temperature compensation.
  • DATA HOLD function for stored the desired value on display.
  • Large LCD display for low power consumption & clear read-out even in bright ambient light condition.
  • Used the durable, long-lasting components, including a strong, light weight ABS-plastic housing case.
  • Compact size, designed for easy carry out & operation.
  • Built-in low battery indicator.

Specifications

Display : 18 mm (0.7″) LCD, 3 1/2 digits., 3 1/2 digits, max. display 1999
Measurement & Range : 199.9 uS, 1.999 mS, 19.99 mS, Data Hold. * Build in 199.9 mS range, it only for reference, not specify the accuracy
Resolution : 0.1 uS for 199.9 uS range. 0.001 mS for 1.999 mS range. 0.01 mS for 19.99 mS range. * uS : micro Simens, mS : milli-Simens
Accuracy : ( 2% F.S. + 1 d )
Over Range Indicator : Display shows ‘1’
Sampling Time : Approx. 0.4 second
Temp. Compensation : Automatic, 0 to 50 (32 to 122 )
Operating Humidity : Max. 80% RH
Power Supply : 006P DC 9V battery(heavy duty type)
Power Current : Approx. DC 5 mA
Weight : 340 g/0.75 LB(w/battery & electrode)
Dimension : 168 x 80 x 35mm (6.6 x 3.2 x 1.2 inch)
Electrode Size : Round, 22 mm Dia. x 120 mm length
Accessories Included : Instruction Manual, Conductivity electrode, Carrying Case
Cal. Solution : Optional, 1.413 mS calibration solution. CD-14

Lutron PCD-431 Pen Type Conductivity TDS Meter

Product Review

  • 2 ranges : 2,000 uS, 20 mS
  • Temperature measurement, oC/oF
  • Automatic temperature compensation
  • Probe with the meter, all in one
  • Carbon rode electrode, high reliability
  • Data hold, Record ( max., min. )
  • IP-67 Water resistance, heavy duty
  • External calibration buttons
  • DC 1.5V battery ( UM-4, AAA ) x 4

৳ 15,000.00

Features

  • All in one pen type conductivity meter provides fast, accurate readings with digital reading.
  • Conductivity measurement ( uS, mS ) or TDS ( Total Dissolved Solids, ppm ) can be selected.
  • Conductivity : Two ranges, 2,000 uS, 20.00 mS
  • TDS : Two ranges, 20,000 ppm, 2,000 ppm.
  • Carbon rod electrode for long life.
  • Build in temperature sensor, ATC ( auto temperature compensation ).
  • Temperature measurement, ℃, ℉.
  • IP67, water proof and protection.
  • LCD with two displays show conductivity and Temp value at same time.
  • Data hold function for freezing the desired value.
  • Auto power off to save the battery life.
  • Records max. and min. value with recall.
  • Microcomputer circuit, intelligent function, high accuracy.
  • Compact size, light weight.
  • Power supply by DC 1.5 V battery ( UM4/AAA ) x 4 PCs,
  • Available for wide applications, such as aquarium, beverage, fish hatcheries, food processing, photography, laboratory, quality control, school & colleges, swimming pools, water conditions.

Specifications

DisplayLCD, size : 20 mm x 28 mm.
Measurement* Conductivity ( uS, mS )* TDS ( Total Dissolved Solids, ppm )* Temperature ( ℃,℉)
Ranges* two ranges* auto rangeConductivity: 2000 uS, 20.00 mS
TDS : 2,000 ppm 20,000 ppm
Accuracy* 23 ± 5 ℃±  ( 2% FS + 1 d )* FS : full scale
TemperatureCompensationAutomatic from 0 to 60 ℃ (32 – 140 ℉),with temperature compensation factor variable between 0 to 5.0% per C.
ConductivityProbe StructureCarbon rod electrode for long life.
Data HoldFreeze the display reading.
Memory RecallMaximum & Minimum value.
Sampling TimeApprox. 0.8 second.
CircuitCustom one-chip of microprocessor LSI circuit.
Power offAuto shut off saves battery life or manual off by push button.* Power will off automatically after 10 min., ifno button be pressed.
Operating Temperature0 to 50 ℃ ( 32 to 140 ℉ ).
Operating HumidityLess than 80% RH.
Power SupplyDC 1.5V battery ( UM-4/AAA ) x 4 PCs.
Power ConsumptionApprox. 5.7 mA.
Dimension190 x 40 x 40 mm ( 7.5 x 1.6 x 1.6 inch ).
Weight171 g/0.38 LB.
Standard AccessoriesInstruction Manual……………………… 1 PC
Power offAuto shut off saves battery life or manual off by push button.* Power will off automatically after 10 min., if nobutton be pressed.
Standard AccessoriesInstruction Manual……………………… 1 PC
Optional Accessories*  Soft carrying case with sash( 210 x 80 x 50 mm ), Model : CA-52A*  Hard carrying case( 280 x 195 x 65 mm ), Model : CA-06*  1.413 mS Conductivity Standard Solution,Model : CD-14A

Senz mSiemen (0~19.9mS)

The Senz mSiemen tester is designed to measure high water concentration.  It is widely used in industrial boilers, cooling towers and chemical mixing where water concentration is monitored.  The Senz mSiemen is rugged and accurate with a display resolution on 0.1mS and can measure up to 19.9mS.  With automatic temperature compensation, all readings are displayed at 25ºC for the ease of data comparison. It is also important for accuracy as temperature significantly affects liquid at high concentrations.

Precision
Precise display of 0.1 mS (mili-Siemen) over the scale of 0 to 19.9 mS.

One-Touch Calibration
On activation, the tester calibrates the end-point automatically at prescribed standard solution.

Auto-End Point
The tester automatically senses a stable end-point reading and freezes it for recording.

Hold Function
Able to freeze display for ease of reading and recording.

Beep Function
The tester beeps at every press of the button and beeps on every completed function and end-point reading.

Specifications:

Model:Senz mSiemen
Range:0.1 to 19.9 mS
Resolution:0.1 mS
Accuracy:± 2% full scale
Calibration Points:One touch button
Battery Type:4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:Approx. 100 hours
Automatic Shut-off:Approx. 15 minutes
Automatic Temperature Compensation:0 to 50°C or 32 to 122°F
Operating Temperature:0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):185mm x 65mm x 25mm
Packaging Weight:Approx. 135gm
Product Dimension Size (LxWxH):170mm x 32mm x 15mm
Product Weight:Approx. 70gm
Click to download Instructions Manual

Senz µSiemen (0~1,999µS)

The Senz µSiemen tester is a conductivity tester used to measure water concentrations.  It is used in water treatment, chemical dilution, testing of industrial waste or drinking water where water quality control is required.  The Senz µSiemen tester has a display resolution of 1µS.  It is both rugged and accurate. It is the best tool for the technician on the go!


Precision
Precise display of 1 µS (Micro-Siemen)

One-Touch Calibration
On activation, the tester calibrates the end-point automatically at the prescribed standard solution.

Auto-End Point
The tester automatically senses a stable end-point reading and freezes it for recording.

Hold Function
Able to freeze display for ease of reading and recording.

Beep Function
The tester beeps at every press of the button and beeps on every completed function and end-point reading.

Specifications

Model:Senz µSiemen
Range:1 to 1990 µS
Resolution:1 µS
Accuracy:± 2% full scale
Calibration Points:One touch button
Battery Type:4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:Approx. 100 hours
Automatic Shut-off:Approx. 15 minutes
Automatic Temperature Compensation:0 to 50°C or 32 to 122°F
Operating Temperature:0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):185mm x 65mm x 25mm
Packaging Weight:Approx. 135gm
Product Dimension Size (LxWxH):170mm x 32mm x 15mm
Product Weight:Approx. 70gm
Click to download Instructions Manual

Senz TDS 2 (100-10000 ppm)

The Senz TDS 2 is designed for liquid testing where high concentrations of below 10,000 ppm is measured. The Senz TDS 2 is both rugged and accurate.  TDS readings are converted from conductivity with the factor of 2 which is an industrial standard for water testing.  All readings are temperature compensated to 25ºC, a must for concentrated liquids.  The Senz TDS 2 is used to measure condensate, boiler water, swimming pool water and industrial waste control etc.

Precision
Precise display of 10 ppm over the scale of 0 to 10,000 ppm.

One-Touch Calibration
On activation, the tester calibrates the end-point automatically at prescribed standard solution.

Auto-End Point
The tester automatically senses a stable end-point reading and freezes it for recording.

Hold Function
Able to freeze display for ease of reading and recording.

Beep Function
The tester beeps at every press of the button and beeps on every completed function and end-point reading.

Specifications:

Model:Senz TDS 2
Range:100 to 10,000 ppm
Resolution:100ppm
Accuracy:± 2% full scale
Calibration Points:Single point at 6440ppm
Battery Type:4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:Approx. 100 hours
Automatic Shut-off:Approx. 15 minutes
Automatic Temperature Compensation:0 to 50°C or 32 to 122°F
Operating Temperature:0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):185mm x 65mm x 25mm
Packaging Weight:Approx. 135gm
Product Dimension Size (LxWxH):170mm x 32mm x 15mm
Product Weight:Approx. 70gm
Click to download Instructions Manual

Senz TDS (0~1999ppm)

The Senz TDS tester is designed for ruggedness and accuracy.  TDS is measured in water processing and industrial water treatment and control.  The conversion factor from conductivity is to the factor of 2 which is an industrial standard.  It is the best gauge to perform QC and on-site checks in boilers, cooling towers and chemical dilution for waste disposal.

High Precision
Precise display of 1 ppm over the scale of 0 to 1990 ppm.

One-Touch Calibration
On activation, the tester calibrates the end-point automatically at prescribed standard solutions.

Auto-End Point
The tester automatically senses a stable end-point reading and freezes it for recording.

Beep Function
Beeps at every press of the button and long beep on every completed function or end-point reading.

Specifications:

Model:Senz TDS
Range:1 to 1,990 ppm
Resolution:1 ppm
Accuracy:± 2% full scale
Calibration Points:Single
Battery Type:4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:Approx. 100 hours
Automatic Shut-off:Approx. 15 minutes
Automatic Temperature Compensation:0 to 50°C or 32 to 122°F
Operating Temperature:0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):185mm x 65mm x 25mm
Packaging Weight:Approx. 135gm
Product Dimension Size (LxWxH):170mm x 32mm x 15mm
Product Weight:Approx. 70gm
Click to download Instructions Manual